POWDER COATING OVENS

The distribution is the same as for humidity dryers, with operating temperatures much higher, ranging from 160-180 ° C. The demand for temperature field homogeneity is high, while a large deviation from the set temperature over time is unacceptable.

There is also a strict requirement for a temperature gradient at the time of workpiece heating. Electric energy is recommended for heating the ovens for lower power, while for higher power it is easy to use fuel oil or natural gas, or propane-butane.

The chamber electric ovens have a door on one side, while in the design of the passageways there are additional doors.

The temperature on the surface of the heater is 20 ° C below the ignition temperature of the powder coating.

The distribution is the same as that of humidity dryers, with operating temperatures much higher, ranging from 160-180 ° C. The demand for temperature field homogeneity is high, while a large deviation from the set temperature over time is unacceptable.

There is also a strict requirement for a temperature gradient at the time of workpiece heating. Electric energy is recommended for heating the furnace for lower power, while for higher power it is easy to use fuel oil or natural gas, ie propane-butane.

The chambers have a door on one side, while in the aisle design they have an additional door.

The temperature on the surface of the heater is 20 ° C below the ignition temperature of the powder coating.